Search
Filters
Close

CLNi99125-1DP XTRweld Ni 99 Filler Metal, 1/8, Nickel & Nickel Alloys, 1 lb, TIG

Filler Metal, Ni 99, Display Pack: 1 lb; AWS Classification: ERNiCl; Material: Nickel & Nickel Alloys; Type: TIG (GTAW); Diameter: 1/8 Inch; Length: 36 Inch; Amperage: 145 to 215 A; Voltage: 15 to 20 V; Flow Rate: 20 to 25 CFH
SKU: XTRCLNI991251DP
Manufacturer part number: CLNI99125-1DP
GTIN: 840349209838

Nickell 99 is a machinable cast iron rod and is preferred when the weld needs to be drilled, tapped, milled or machined in any way. AWS Requires a minimum of 85% Nickel in this alloy, typically XTRweld product is typically at least 99%.

APPLICATIONS

    XTR Nickel alloy 99 is used for TIG and MIG welding of gray iron castings, cast iron and joining cast iron to mild steels, stainless-steel alloys and come copper alloys. It can also be used for overlay and build-up applications. Dilution from the casting influences the mechanical properties of the metal. Due to the high nickel content, the welds are readily machinable. A preheat and inter-pass temperature of at least 350°F (175°C) is required before welding on cast iron to minimize the potential for cracks during and after the weld cools.

Nickell 99 is a machinable cast iron rod and is preferred when the weld needs to be drilled, tapped, milled or machined in any way. AWS Requires a minimum of 85% Nickel in this alloy, typically XTRweld product is typically at least 99%.

APPLICATIONS

    XTR Nickel alloy 99 is used for TIG and MIG welding of gray iron castings, cast iron and joining cast iron to mild steels, stainless-steel alloys and come copper alloys. It can also be used for overlay and build-up applications. Dilution from the casting influences the mechanical properties of the metal. Due to the high nickel content, the welds are readily machinable. A preheat and inter-pass temperature of at least 350°F (175°C) is required before welding on cast iron to minimize the potential for cracks during and after the weld cools.